PRIMER-Contact Adhesive is intended for vapor barrier foils, construction foils, roofing membranes, warm assembly tapes - it is a multi-purpose spray product that perfectly glues concrete, brick, metal, stone, cork, foil, ceramics, wood, rubber, rigid plastic, glass , polyethylene, as well as upholstery sponges, mineral wool, cardboard or fabrics. It perfectly combines a very wide range of materials, which is why it is suitable for all renovation, construction and assembly works, also as an adhesive for vapor barrier foil. The great advantage of the glue is that when it is applied on one of the surfaces to be glued, the element can be corrected, torn off or moved for about 10 minutes. The surface from which we detached the element at this time is still clean! The glue is not very absorbent, which ensures that the glued materials do not get wet and that it is highly efficient. Spray glue creates a waterproof, strong and flexible joint. It is quick-drying. It has a long open time. Suitable for porous and non-porous surfaces. It is immediately ready to use (just shake the can) and does not require any additional accessories. The application of the product on both glued surfaces results in a very durable bond. The modern applicator allows for very easy and professional adjustment of the glue stream, thanks to which our work is comfortable in all conditions.
Shake the can before use. Please note that the surfaces to be bonded should be clean, dry, dust-free and degreased. Apply the adhesive from a distance of approx. 20 cm on both surfaces to be glued (on one surface transversely, and on the other lengthwise). Leave the applied adhesive for 2-3 minutes. After this time, the glued elements can be connected with each other and pressed firmly. Avoid puddles and streaks. Foils glued together require the use of tape for full vapor tightness. Excess glue can be removed with mineral spirits or glue remover. After use, turn the can upside down and press the valve to clean it of any glue residue, this way the valve will be cleaned and will remain functional for the next use. Always test the product in an inconspicuous place before use. Do not use for high plastic PVC. Use the product in a well-ventilated room, at a temperature of +5°C to 40°C. Best product use temperature +15°C to 25°C.