Product properties
A ready to use, semi-liquid compound on the basis of a polymer dispersion. After drying, it forms a very elastic and waterproof protective coat that adheres tightly to the substrate and is highly resistant to weather conditions.
'Od a do z flex' liquid film is intended for forming sealing surface coats under outdoor ceramic claddings to prevent moisture penetration (terraces, sloping balconies).
Application
The liquid foil From A to Z Flex is a ready-made sealing compound, which must be thoroughly mixed (mixed) before use using a low-speed mixer. The mass should be applied in at least two layers. Apply the first layer generously with a brush or paint roller, rubbing the mass into the substrate. The second layer can be applied with the same method or with a metal trowel. Each layer should dry over the entire surface. Before applying the next coat after approximately three hours, check the degree of dryness (finger test). On floors in areas exposed to increased traffic (e.g. pedestrian traffic), wait about 12 hours before applying the next layer. The thickness of the obtained coating should be at least 1 mm. Ceramic coverings can be glued directly onto the completely dry sealant. Use flexible adhesives to stick ceramic floor coverings.
Note: Technical data and information on the method of application are given for a temperature of 23 ° C ± 2 ° C and a relative humidity of 50% - 60%. The drying time may change in different conditions. Keep the product away from children. If your eyes get dirty, rinse them immediately with plenty of water and consult a doctor. Also protect the skin by using protective clothing and gloves. Tools and any contamination should be washed off immediately with water. The manufacturer is not liable for any damages resulting from unskilful or inappropriate use of the product.
