Product properties
For decorative wood impregnation indoors and outdoors; it provides wood with permanent colouring and gloss. It is recommended for finishing wooden elements, i.e.: facades, pillars, beams, balustrades, window shutters, doors, and lawn furniture. Retains visible structure of wood. Provides protection against biocorrosion. Coating resistant to impact of atmospheric conditions.
Application
Form - liquid with colour according to the specifications (colours + colourless). Density - 0.88 g/cm3
In the case of new, raw wood - smooth the surface. In other cases, the wood intended for impregnation should be clean and dry, without the remains of previous coatings. If necessary, degrease, sand and remove dust and dirt. Immediately before use and during work, the preparation should be carefully mixed to obtain the desired consistency. The wood should be protected with the method of 2-3 times brushing or spraying, depending on where the wood will be used indoors or outdoors, at intervals not shorter than approx. 3-9 hours depending on the temperature and air humidity. The final color of the impregnating surface depends on the quality and type of wood, the type of surface treatment and the number of applied layers of the preparation. Work in temperatures above 5ºC. After completing the work, clean the tools with white spirit. The rooms where the product was used should be ventilated until the characteristic smell disappears.
